Question 1

How is my 3D printing price calculated?

Accepted Answer

We measure your STL directly in your browser — its volume, surface area and dimensions — then estimate how much filament the part will consume and how long the printer will be occupied. The price is the filament used (from 3 EGP per gram) plus machine time at 5 EGP per hour. Nothing is uploaded before you see the price.

Question 2

What file format do you need, and how large can it be?

Accepted Answer

We accept .stl files up to 50 MB, in either binary or ASCII form. Almost every CAD package can export STL — in Fusion 360, SolidWorks or Tinkercad it's under File then Export. If your model is larger than 50 MB, message us on WhatsApp and we'll arrange it.

Question 3

How dimensionally accurate are your printed parts?

Accepted Answer

We hold ±0.2 mm on printed dimensions, so a 50 mm feature lands between 49.8 and 50.2 mm. That is fine for enclosures, brackets, jigs and most functional parts. If your design depends on a tighter fit than that — a press fit, a bearing seat, a printed thread — design in clearance rather than relying on an exact size, and expect to ream or file the critical feature afterwards. Tell us which dimension matters and we will orient the part to favour it.

Question 4

What are your minimum trace width, spacing and drill size?

Accepted Answer

Minimum trace width is 0.6 mm, minimum clearance between copper features is 0.6 mm, and the smallest hole we drill is 0.6 mm. Set these as the design rules in KiCad, EasyEDA or Altium before you route, and your board will etch cleanly first time. Anything finer than this cannot be held reliably — fine-pitch parts such as 0.5 mm QFPs or BGAs are outside what we can fabricate, so check the footprint of your smallest component before you order.

Question 5

How long will my order take?

Accepted Answer

Typically Within a week for 3D printing and 2–4 days for PCBs, measured from when payment is confirmed. Large or complex jobs take longer. These are estimates — we confirm an exact date when we contact you about your order.

Question 6

Where do you deliver, and how much does shipping cost?

Accepted Answer

We deliver to all 27 governorates of Egypt, from Matrouh to Aswan, and local pickup is always free. The courier fee is a flat price set by your governorate — from 95 EGP for Cairo and Giza up to 135 EGP for the far south and Red Sea — shown at checkout and included in your total, never sprung on you afterwards. Parcels over 2 kg add 10 EGP for each extra kilogram above that; only printed parts are heavy enough to reach it, boards and design work are not.

3D printing & PCB manufacturing in Egypt.
From file to finished part, priced instantly.

3D Printing

PCB Fabrication

Design & Engineering

How it works

Upload

Configure

Submit

3D printing and PCB manufacturing in Egypt·طباعة ثلاثية الأبعاد وتصنيع PCB في مصر

3D printing & PCB manufacturing in Egypt.From file to finished part, priced instantly.